From the notice

This requirement is for the installation of necessary components on a 2026 FORD F-350 (Tag number G61D6537 , VIN# 1FD8W3FN9TEE72593). All equipment must be covered by the manufacturer’s warranty. All items shall include standard warranty. Repairs will be completed in accordance with industry standards. Vendors shall be following all EPA and OSHA standards and requirements. SDS and any other required documents must be on site. Vendors must be properly insured to cover any losses for GSA vehicles that are in their shop. Valid business license(s) is required in accordance with state and local guidelines. All employees of selected vendor must be paid in accordance with local Department of Labor established wages. Please see Bill of Materials (BOM). BOM: 60 Inch Cab to Axle Front Winch, Mount, Guard, Lights WARN Winch and Mount -Warn16.5 Winch- WARN PN# WARN 68801 - Winch Mounting Bracket -WARN PN# 108001 -Winch Carrier- WARN PN# 107651 -Winch Guard- WARN PN# 109580 Light Bar LED 2 row light bar -Approximately 20 inches -Wired to upfitter switches LED Amber Strobe -Mounted in front grill and rear of utility bed -Wired to upfitter switch Go light -Mounted on driver side on material rack -Two remotes -LED lights Body mounted work lights -LED light -Mounted at rear of utility bed Truck Body Cab length running boards. Utility Body Body- CM brand TM body or equivalent - Spring mounted front mount - Final overall ground clearance to match lowest point on truck cab. Roughly 22 inches.

Read the whole notice and its files on SAM.gov ↗