48 CFR · Federal Acquisition Regulation and Defense supplement
FAR and DFARS navigator
The codified text (eCFR, as of 2026-10-02). Under the Revolutionary FAR Overhaul ↗, agencies follow class deviations with new text for many parts while the formal rules go through the Federal Register: check the solicitation and your contract's clauses, which rule.
Ask the FAR
Try: · · ·
90 sections with “manufactured in the United States”: the first 40
- DFARS 225.070 Reporting of acquisition of end products manufactured outside the United States.…ow the procedures at PGI 225.070 for entering the data on the acquisition of end products manufactured outside the United States.
- FAR 25.604 Preaward determination concerning the inapplicability of section 1605 of the Recovery Act or the Buy American statute.…on. (c) Determination based on unreasonable cost of domestic construction material. (1) Manufactured construction material. The contracting officer must compare the offered price of the contract using foreign manufactured construction mat…
- DFARS 252.225-7005 Identification of Expenditures in the United States.…into the following categories: (i) U.S. products—expenditures for material and equipment manufactured or produced in the United States, including end products, components, or construction material, but excluding transportation; (ii) U.S. …
- FAR 12.505 Applicability of certain laws to contracts for the acquisition of COTS items.…) that reads “substantially all from articles, materials, or supplies mined, produced, or manufactured in the United States,” Buy American—Supplies, domestic content test, except as provided in 25.101(a)(2)(ii) (see 52.225-1 and 52.225-3). …
- FAR 25.003 Definitions.…ble duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (…
- FAR 25.601 Definitions.As used in this subpart— Domestic construction material means the following: (1) An unmanufactured construction material mined or produced in the United States. (The Buy American statute applies.) (2) A manufactured construction material…
- FAR 25.602-1 Section 1605 of the Recovery Act.…ding or public work is located in the United States and— (1) All of the iron, steel, and manufactured goods used as construction material in the project are produced or manufactured in the United States. (i) All manufactured construction …
- FAR 52.225-21 Required Use of American Iron, Steel, and Manufactured Goods—Buy American Statute—Construction Materials.…ed in 25.1102(e), insert the following clause: Required Use of American Iron, Steel, and Manufactured Goods—Buy American Statute—Construction Materials (JAN 2021) (a) Definitions. As used in this clause— Component means an article, mater…
- FAR 52.225-23 Required Use of American Iron, Steel, and Manufactured Goods—Buy American Statute—Construction Materials Under Trade Agreements.…ed in 25.1102(e), insert the following clause: Required Use of American Iron, Steel, and Manufactured Goods—Buy American Statute—Construction Materials Under Trade Agreements (NOV 2023) (a) Definitions. As used in this clause— Component …
- DFARS 225.003 Definitions.… not consist wholly or predominantly of iron or steel or a combination of both— (i) An unmanufactured end product mined or produced in the United States; or (ii) An end product manufactured in the United States if— (A) The cost of its qu…
- DFARS 225.7017-1 Definitions.…ibbean Basin country photovoltaic device means a photovoltaic device that— (1) Is wholly manufactured in a Caribbean Basin country; or (2) In the case of a photovoltaic device that consists in whole or in part of materials from another co…
- DFARS 252.225-7052 Restriction on the Acquisition of Certain Magnets, Tantalum, and Tungsten.…contract any covered material melted or produced in any covered country, or any end item, manufactured in any covered country, that contains a covered material; and (ii) Effective January 1, 2027, the Contractor shall not deliver under thi…
- FAR 19.505 Limitations on subcontracting and nonmanufacturer rule.… a “nonmanufacturer”), is required to— (i) Provide an end item that a small business has manufactured, processed, or produced in the United States or its outlying areas (see paragraph (c)(3) of this section for determining the manufacturer…
- DFARS 252.225-7012 Preference for Certain Domestic Commodities.…s. (9) Wool (whether in the form of fiber or yarn or contained in fabrics, materials, or manufactured articles). (10) Any item of individual equipment (Federal Supply Class 8465) manufactured from or containing fibers, yarns, fabrics, or …
- DFARS 252.225-7049 Prohibition on Acquisition of Certain Foreign Commercial Satellite Services—Representations.…t such satellite service will be provided using satellites that will be— (A) Designed or manufactured— (1) In a covered foreign country; or (2) By an entity controlled in whole or in part by, or acting on behalf of, the government of a c…
- FAR 25.106 Determining reasonableness of cost.…e contracting officer shall— (A) Treat the lowest offer of a foreign end product that is manufactured in the United States and exceeds 55 percent domestic content as a domestic offer; and (B) Determine the reasonableness of the cost of th…
- FAR 25.204 Evaluating offers of foreign construction material.…cting officer shall— (A) Treat the lowest offer of foreign construction material that is manufactured in the United States and exceeds 55 percent domestic content as a domestic offer; and (B) Determine the reasonableness of the cost of th…
- FAR 25.603 Exceptions.…ceptions applies, the contracting officer may allow the contractor to incorporate foreign manufactured construction materials without regard to the restrictions of section 1605 of the Recovery Act or foreign unmanufactured construction mate…
- FAR 52.212-3 Offeror Representations and Certifications—Commercial Products and Commercial Services.… U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except— (1) PSC 5510, Lumber and Related Basic Wood Mat…
- FAR 52.213-4 Terms and Conditions—Simplified Acquisitions (Other Than Commercial Products and Commercial Services).…product in paragraph (a) of 52.225-1: (A) The cost of its components mined, produced, or manufactured in the United States exceeds __ percent of the cost of all its components. [Contracting officer to insert the percentage per instructions…
- FAR 52.225-1 Buy American—Supplies.…ble duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (…
- FAR 52.225-3 Buy American—Free Trade Agreements—Israeli Trade Act.…ble duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (…
- FAR 52.225-9 Buy American—Construction Materials.…ble duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (…
- FAR 52.225-11 Buy American—Construction Materials Under Trade Agreements.…ble duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (…
- DFARS 225.7004-5 Additional restrictions on anchor and mooring chain.…ations acts, do not acquire welded shipboard anchor and mooring chain, unless— (1) It is manufactured in the United States, including cutting, heat treating, quality control, testing, and welding (both forging and shot blasting process); a…
- DFARS 252.225-7001 Buy American and Balance of Payments Program.…ly into an end product. Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105. Critical item means…
- DFARS 252.225-7016 Restriction on Acquisition of Ball and Roller Bearings.… of this clause— (1) Each ball and roller bearing delivered under this contract shall be manufactured in the United States, its outlying areas, or Canada; and (2) For each ball or roller bearing, the cost of the bearing components manufac…
- DFARS 252.225-7017 Photovoltaic Devices.…is clause— Bahraini photovoltaic device means a photovoltaic device that— (1) Is wholly manufactured in Bahrain; or (2) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been su…
- DFARS 252.225-7019 Restriction on Acquisition of Anchor and Mooring Chain.…b) Welded shipboard anchor and mooring chain delivered under this contract— (1) Shall be manufactured in the United States or its outlying areas, including cutting, heat treating, quality control, testing, and welding (both forging and sho…
- DFARS 252.225-7021 Trade Agreements.… the following are qualifying countries: Qualifying country end product means— (1) An unmanufactured end product mined or produced in a qualifying country; or (2) An end product manufactured in a qualifying country if— (i) The cost of t…
- DFARS 252.225-7035 Buy American—Free Trade Agreements—Balance of Payments Program Certificate.…; and (iii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country. (2) The Offeror shall identify all end products that are not domestic end products. …
- DFARS 252.225-7036 Buy American—Free Trade Agreements—Balance of Payments Program.…ly into an end product. Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105. Critical item means…
- DFARS 252.225-7044 Balance of Payments Program—Construction Material.…ble duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (…
- DFARS 252.225-7045 Balance of Payments Program—Construction Material Under Trade Agreements.…ble duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (…
- DFARS 252.225-7064 Restriction on Acquisition of Certain Satellite Components.…. Government. (b) Restriction. In accordance with 10 U.S.C. 4864, a star tracker must be manufactured in the United States, Australia, Canada, New Zealand, or the United Kingdom of Great Britain and Northern Ireland (United Kingdom). The C…
- DFARS 252.227-7038 Patent Rights—Ownership by the Contractor (Large Business).…odying the subject invention or produced through the use of the subject invention will be manufactured substantially in the United States. However, in individual cases, the agency may waive the requirement for an exclusive license agreement…
- FAR 2.101 Definitions.…ng the course of the manufacture or furnishing, or owns the materials from which they are manufactured or furnished) is not “building” or “work” within the meaning of this definition unless conducted in connection with and at the site of su…
- DFARS 225.7702-1 Acquisition of small arms.…ible U.S. manufacturer is excluded from competing for the acquisition; and (ii) Products manufactured in the United States are not excluded from the competition; and (3) If the exception at FAR 6.302-2 (unusual and compelling urgency) app…
- DFARS 252.225-7000 Buy American—Balance of Payments Program Certificate.… COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country. For those end products that do not consist wholly or predominantly of iron or steel or…
- DFARS 252.225-7006 Acquisition of the American flag.…ervice Code 8345), such flag(s), including the materials and components thereof, shall be manufactured in the United States, consistent with the requirements at 10 U.S.C. 4862 (commonly known as the “Berry Amendment”). (c) This clause does…
FAR (chapter 1)
- Part 1 Federal Acquisition Regulations System 58 sections
- Part 2 Definitions of Words and Terms 3 sections
- Part 3 Improper Business Practices and Personal Conflicts of Interest 98 sections
- Part 4 Administrative and Information Matters 116 sections
- Part 5 Publicizing Contract Actions 34 sections
- Part 6 Competition Requirements 34 sections
- Part 7 Acquisition Planning 34 sections
- Part 8 Required Sources of Supplies and Services 67 sections
- Part 9 Contractor Qualifications 106 sections
- Part 10 Market Research 4 sections
- Part 11 Describing Agency Needs 33 sections
- Part 12 Acquisition of Commercial Products and Commercial Services 38 sections
- Part 13 Simplified Acquisition Procedures 49 sections
- Part 14 Sealed Bidding 82 sections
- Part 15 Contracting by Negotiation 81 sections
- Part 16 Types of Contracts 74 sections
- Part 17 Special Contracting Methods 50 sections
- Part 18 Emergency Acquisitions 34 sections
- Part 19 Small Business Programs 126 sections
- Part 22 Application of Labor Laws to Government Acquisitions 205 sections
- Part 23 Environment, Sustainable Acquisition, and Material Safety 38 sections
- Part 24 Protection of Privacy and Freedom of Information 10 sections
- Part 25 Foreign Acquisition 81 sections
- Part 26 Other Socioeconomic Programs 36 sections
- Part 27 Patents, Data, and Copyrights 59 sections
- Part 28 Bonds and Insurance 61 sections
- Part 29 Taxes 23 sections
- Part 30 Cost Accounting Standards Administration 30 sections
- Part 31 Contract Cost Principles and Procedures 87 sections
- Part 32 Contract Financing 175 sections
- Part 33 Protests, Disputes, and Appeals 23 sections
- Part 34 Major System Acquisition 20 sections
- Part 35 Research and Development Contracting 25 sections
- Part 36 Construction and Architect-engineer Contracts 81 sections
- Part 37 Service Contracting 46 sections
- Part 38 Federal Supply Schedule Contracting 3 sections
- Part 39 Acquisition of Information Technology 14 sections
- Part 40 Information Security and Supply Chain Security 12 sections
- Part 41 Acquisition of Utility Services 17 sections
- Part 42 Contract Administration and Audit Services 84 sections
- Part 43 Contract Modifications 14 sections
- Part 44 Subcontracting Policies and Procedures 24 sections
- Part 45 Government Property 33 sections
- Part 46 Quality Assurance 60 sections
- Part 47 Transportation 106 sections
- Part 48 Value Engineering 13 sections
- Part 49 Termination of Contracts 108 sections
- Part 50 Extraordinary Contractual Actions and the Safety Act 34 sections
- Part 51 Use of Government Sources by Contractors 15 sections
- Part 52 Solicitation Provisions and Contract Clauses 680 sections
- Part 53 Forms 61 sections
DFARS (chapter 2, Defense)
- Part 201 Federal Acquisition Regulations System 24 sections
- Part 202 Definitions of Words and Terms 1 sections
- Part 203 Improper Business Practices and Personal Conflicts of Interest 28 sections
- Part 204 Administrative and Information Matters 76 sections
- Part 205 Publicizing Contract Actions 11 sections
- Part 206 Competition Requirements 20 sections
- Part 207 Acquisition Planning 22 sections
- Part 208 Required Sources of Supplies and Services 31 sections
- Part 209 Contractor Qualifications 55 sections
- Part 210 Market Research 2 sections
- Part 211 Describing Agency Needs 22 sections
- Part 212 Acquisition of Commercial Products and Commercial Services 24 sections
- Part 213 Simplified Acquisition Procedures 23 sections
- Part 214 Sealed Bidding 14 sections
- Part 215 Contracting by Negotiation 66 sections
- Part 216 Types of Contracts 36 sections
- Part 217 Special Contracting Methods 64 sections
- Part 218 Emergency Acquisitions 7 sections
- Part 219 Small Business Programs 47 sections
- Part 222 Application of Labor Laws to Government Acquisitions 56 sections
- Part 223 Environment, Sustainable Acquisition, and Material Safety 34 sections
- Part 224 Protection of Privacy and Freedom of Information 2 sections
- Part 225 Foreign Acquisition 251 sections
- Part 226 Other Socioeconomic Programs 14 sections
- Part 227 Patents, Data, and Copyrights 99 sections
- Part 228 Bonds and Insurance 17 sections
- Part 229 Taxes 9 sections
- Part 230 Cost Accounting Standards Administration 2 sections
- Part 231 Contract Cost Principles and Procedures 13 sections
- Part 232 Contract Financing 74 sections
- Part 233 Protests, Disputes, and Appeals 8 sections
- Part 234 Major System Acquisition 13 sections
- Part 235 Research and Development Contracting 16 sections
- Part 236 Construction and Architect-engineer Contracts 25 sections
- Part 237 Service Contracting 67 sections
- Part 239 Acquisition of Information Technology 38 sections
- Part 241 Acquisition of Utility Services 8 sections
- Part 242 Contract Administration and Audit Services 40 sections
- Part 243 Contract Modifications 18 sections
- Part 244 Subcontracting Policies and Procedures 13 sections
- Part 245 Government Property 23 sections
- Part 246 Quality Assurance 39 sections
- Part 247 Transportation 27 sections
- Part 249 Termination of Contracts 14 sections
- Part 250 Extraordinary Contractual Actions and the Safety Act 16 sections
- Part 251 Use of Government Sources by Contractors 5 sections
- Part 252 Solicitation Provisions and Contract Clauses 405 sections
- Part 253 Forms 10 sections
- Part 270 Defense Contracting Programs 7 sections
Source: eCFR, 48 CFR chapters 1 and 2 (GPO GovInfo bulk data) ↗. Rule changes in progress: FAR, DFARS. Terms: glossary.