SpendQueryBeta

48 CFR · Federal Acquisition Regulation and Defense supplement

FAR and DFARS navigator

The codified text (eCFR, as of 2026-10-02). Under the Revolutionary FAR Overhaul ↗, agencies follow class deviations with new text for many parts while the formal rules go through the Federal Register: check the solicitation and your contract's clauses, which rule.

Ask the FAR

Try: · · ·

Clear

190 sections with “complete termination”: the first 40

  • FAR 49.603-1 Fixed-price contracts—complete termination.
    [Insert the following in Block 14 of SF 30 for settlements of fixed-price contracts completely terminated.] (a) This supplemental agreement settles the settlement proposal resulting from the Notice of Termination dated ____________________…
  • FAR 49.603-3 Cost-reimbursement contracts—complete termination, if settlement includes cost.
    …he following in Block 14 of SF 30 for settlement of cost-reimbursement contracts that are completely terminated, if settlement includes costs.] (a) This supplemental agreement settles the settlement proposal resulting from the Notice of Te…
  • FAR 49.603-4 Cost-reimbursement contracts—complete termination, with settlement limited to fee.
    …he following in Block 14 of SF 30 for settlement of cost-reimbursement contracts that are completely terminated, if settlement is limited to fee.] (a) This supplemental agreement settles the amount of fee due under the contract, terminated…
  • FAR 49.603-6 No-cost settlement agreement—complete termination.
    [Insert the following in Block 14 of SF 30 if a no-cost settlement agreement, under a complete termination, is to be executed.] (a) This supplemental agreement __________ [insert “modifies the contract to reflect a no-cost settlement agree…
  • FAR 52.249-2 Termination for Convenience of the Government (Fixed-Price).
    …bcontracts in this clause) for materials, services, or facilities, except as necessary to complete the continued portion of the contract. (3) Terminate all subcontracts to the extent they relate to the work terminated. (4) Assign to the G…
  • FAR 52.249-3 Termination for Convenience of the Government (Dismantling, Demolition, or Removal of Improvements).
    …bcontracts in this clause) for materials, services, or facilities, except as necessary to complete the continued portion of the contract. (3) Terminate all subcontracts to the extent they relate to the work terminated. (4) Assign to the G…
  • FAR 52.249-5 Termination for Convenience of the Government (Educational and Other Nonprofit Institutions).
    …bcontracts or orders (referred to as subcontracts in this clause), except as necessary to complete the continued portion of the contract. (3) Terminate all applicable subcontracts and cancel or divert applicable commitments covering person…
  • FAR 52.249-6 Termination (Cost-Reimbursement).
    …bcontracts or orders (referred to as subcontracts in this clause), except as necessary to complete the continued portion of the contract. (3) Terminate all subcontracts to the extent they relate to the work terminated. (4) Assign to the G…
  • FAR 4.804-4 Physically completed contracts.
    …t as provided in paragraph (b) of this section, a contract is considered to be physically completed when— (1)(i) The contractor has completed the required deliveries and the Government has inspected and accepted the supplies; (ii) The con…
  • FAR 49.105 Duties of termination contracting officer after issuance of notice of termination.
    …osal by determination for the elements that cannot be agreed on, if unable to negotiate a complete settlement. (b) To expedite settlement, the TCO may request specially qualified personnel to— (1) Assist in dealings with the contractor; …
  • FAR 49.115 Settlement of terminated incentive contracts.
    …e Targets. The contracting officer shall apply the incentive price revision provisions to completed items accepted by the Government, including any for which the contractor may request reimbursement in the settlement proposal. The TCO shall…
  • FAR 49.206-2 Bases for settlement proposals.
    … (2) An allowance for profit (49.202) or adjustment for loss (49.203(b)) must be made to complete the gross settlement proposal. All unliquidated advance and progress payments and all disposal and other credits known when the proposal is s…
  • FAR 49.402-2 Effect of termination for default.
    …Default clause, to require the contractor to transfer title and deliver to the Government completed supplies and manufacturing materials, as directed by the contracting officer. (b) The contracting officer shall not use the Default clause …
  • FAR 49.205 Completed end items.
    … Promptly after the effective date of termination, the TCO shall (1) have all undelivered completed end items inspected and accepted if they comply with the contract requirements, and (2) determine which accepted end items are to be deliver…
  • FAR 49.601-1 Electronic notice.
    …01-2, the contracting officer need not send the letter notice described in 49.601-2. (a) Complete termination. The following electronic notice is suggested for use if a supply contract is being completely terminated for convenience. If app…
  • FAR 49.603-2 Fixed-price contracts—partial termination.
    …ubdivision (i) above, together with sums previously paid, constitutes payment in full and complete settlement of the amount due the Contractor for the terminated portion of the contract, except as provided in subparagraph (8) below. (iii) …
  • FAR 52.216-6 Price Redetermination—Retroactive.
    … paragraph (g) shall apply until final price redetermination under this contract has been completed. (1) Within 45 days after the end of the quarter of the Contractor's fiscal year in which a delivery is first made (or services are first p…
  • FAR 2.101 Definitions.
    … to the best of the person's knowledge and belief, the cost or pricing data are accurate, complete, and current as of a date certain before contract award. Cost or pricing data are required to be certified in certain procurements (10 U.S.C.…
  • FAR 4.804-5 Procedures for closing out contract files.
    …ting office of any excess funds the contract administration office might deobligate. When complete, the administrative closeout procedures must ensure that— (1) Disposition of classified material is completed; (2) Final patent report is c…
  • FAR 8.405-6 Limiting sources.
    …old, see paragraph (c) of this section. (iii) The documentation or justification must be completed and approved at the time the requirement for a brand-name item is determined. In addition, the justification for a brand-name item is requir…
  • FAR 15.407-1 Defective certified cost or pricing data.
    …acting officer learns that any certified cost or pricing data submitted are inaccurate, incomplete, or noncurrent, the contracting officer shall immediately bring the matter to the attention of the prospective contractor, whether the defect…
  • FAR 15.408 Solicitation provisions and contract clauses.
    …roposals in lower amounts. Subcontractor certified cost or pricing data must be accurate, complete and current as of the date of final price agreement, or an earlier date agreed upon by the parties, given on the prime contractor's Certifica…
  • FAR 32.904 Determining payment due dates.
    …Price Architect-Engineer Contracts, is as follows: (i) The due date for work or services completed by the contractor is the later of the following two events: (A) The 30th day after the designated billing office receives a proper invoice …
  • FAR 49.112-1 Partial payments.
    … up to— (1) 100 percent of the contract price, adjusted for undelivered acceptable items completed before the termination date, or later completed with the approval of the TCO (see 49.205); (2) 100 percent of the amount of any subcontract…
  • FAR 49.203 Adjustment for loss.
    …if it appears that the contractor would have incurred a loss had the entire contract been completed. The TCO shall negotiate or determine the amount of loss and make an adjustment in the amount of settlement as specified in paragraph (b) or…
  • FAR 49.601-2 Letter notice.
    …notice to you dated ______________________, 20____, terminating ________________ [insert “completely” or “in part”] Contract No. ______________ (referred to as “the contract”) for the Government's convenience under the clause entitled _____…
  • FAR 52.212-3 Offeror Representations and Certifications—Commercial Products and Commercial Services.
    … Certifications—Commercial Products and Commercial Services (OCT 2025) The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System f…
  • FAR 52.216-5 Price Redetermination—Prospective.
    …yment account, consistent with the Progress Payments clause. The Contractor shall provide complete details to support any claimed reductions in refunds. (4) If the Contractor fails to submit the quarterly statement within 45 days after the…
  • FAR 52.216-16 Incentive Price Revision—Firm Target.
    … the end of the month in which the Contractor has delivered the last unit of supplies and completed the services specified by item number in paragraph (a) of this clause, the Contractor shall submit in the format of Table 15-2, FAR 15.408, …
  • FAR 52.216-17 Incentive Price Revision—Successive Targets.
    …fficer insert number of days] days after the end of the month in which the Contractor has completed ___ [see Note 1], the Contractor shall submit the following data: (i) A proposed firm fixed price or total firm target price for supplies d…
  • FAR 52.230-6 Administration of Cost Accounting Standards.
    …de— (i) Only those affected CAS-covered contracts and subcontracts having an estimate to complete exceeding a specified amount; and (ii) An estimate of the total increase or decrease in cost accumulations for all affected CAS-covered cont…
  • FAR 52.232-16 Progress Payments.
    …. (iv) Payments made or amounts payable to subcontractors or suppliers, except for— (A) Completed work, including partial deliveries, to which the Contractor has acquired title; and (B) Work under cost-reimbursement or time-and-material …
  • FAR 52.236-21 Specifications and Drawings for Construction.
    …ss stated otherwise. The word provided as used herein shall be understood to mean provide complete in place, that is furnished and installed. (d) Shop drawings means drawings, submitted to the Government by the Contractor, subcontractor, o…
  • FAR 52.245-1 Government Property.
    …tract for which title is vested in the Government and which exceeds the amounts needed to complete full performance under the entire contract; (2) Any property that the Government is obligated or has the option to take over under any type …
  • FAR 52.249-7 Termination (Fixed-Price Architect-Engineer).
    …ies, and other information and materials accumulated in performing this contract, whether completed or in process. (b) If the termination is for the convenience of the Government, the Contracting Officer shall make an equitable adjustment …
  • FAR 52.249-9 Default (Fixed-Price Research and Development).
    …sfer title and deliver to the Government, as directed by the Contracting Officer, any (1) completed or partially completed work not previously delivered to, and accepted by, the Government and (2) other property, including contract rights, …
  • FAR 52.249-10 Default (Fixed-Price Construction).
    …ompletion within the time specified in this contract including any extension, or fails to complete the work within this time, the Government may, by written notice to the Contractor, terminate the right to proceed with the work (or the sepa…
  • DFARS 215.404-71-3 Contract type risk and working capital adjustment.
    …the Block 24a column titled Base. (ii) Insert the amount of Government estimated cost to complete (excluding facilities capital cost of money) into the Block 24b column titled Base. (3) Multiply (1) by (2)(i) and (2)(ii), respectively for…
  • DFARS 252.217-7009 Default.
    …the extent not terminated under the provisions of this clause. (ii) If the work is to be completed at the plant, the Government may use all tools, machinery, facilities, and equipment of the Contractor determined by the Contracting Office …
  • DFARS 252.225-7045 Balance of Payments Program—Construction Material Under Trade Agreements.
    …are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those s…

FAR (chapter 1)

DFARS (chapter 2, Defense)

Source: eCFR, 48 CFR chapters 1 and 2 (GPO GovInfo bulk data) ↗. Rule changes in progress: FAR, DFARS. Terms: glossary.